MD-10 binding is a powder-based mineral material in ready for use state. In the workplace conditions it only need to be mixed with adequate amount of water.
MD-10 binding characterise with:
Short time of binding – it’s start to bind after 30 – 40 minutes and the end of binding process it’s finish after 3 – 4 hours.
Fast growth of durability
Great final durability, approximately 60 MPa after 28 days.
Softening factor is 0,73
Bulk density is 1,96 kg/dcm³
Due to its characteristics MD-10 binding is intended to be used in construction and mining industry, among other things in:
Constructing element of the floors, foundations and walls
Binding, isolation and sealing of ground and rock mass
Constructing all sorts of dams
Constructing of high durability excavation heading supports
Filling up and building up free spaces
Making of mortar and concrete for immediate repairs
> Fastening of appliances with construction elements to rock mass or foundations
> To toughen the rock mass with metal and plastic support elements
Properties of the MD-10 depends on the water/powder (w/p) ratio. The average processing parameters and utility of the binder with the w/p equal to 0,3:1 are shown in the table below:
The product is certified with the B sign of safety issued by GIG in Katowice (Central Mining Institute in Katowice)
P.P.U.H. MIDO Sp. z o.o. offers complete advice on the use of products and technologies.
It is possible to inject MD-10 mineral binding after mixing with adequate amount of water by thick masses pumps or apply to holes in special paper covers. It can also be used in traditional ways. According to requirement MD-10 binding can be mixed with chippings like: sand, gravel, ground clinker etc.
Binder MD-10 is a safe material, not causing any threats to life and health of workers if follow the fallowing conditions:
● during contact with a binder use complete work clothes, gloves, goggles and masks,
● compliance with safety regulations and safety recommendations given by the manufacturer,
● training of the crew in the correct transport, storage and application methods.
PACKAGING AND STORAGE
Binder MD-10 is packaged in 20 kg multi-layer bags stacked on wooden pallets weighing 1 ton. Bags on the pallets are foiled.
Each package has a label products, which includes: the manufacturer’s name, product name, date of manufacture, the warranty period, a sign informing about the risks, Health and Safety, purpose, properties, preparation and method of use and the way the complaint.
Shelf-life for use up to 6 months from the date of production.
The storage conditions
The product should be stored in a dry place, protecting against the effects of atmospheric factors.
Ta strona korzysta z ciasteczek aby świadczyć usługi na najwyższym poziomie. Dalsze korzystanie ze strony oznacza, że zgadzasz się na ich użycie.Zgoda